Description

STEEL TABLES:

We have a series of steel tables in stock, but as a starting point, this series is specially produced for your needs. Therefore, there will typically be 3-4 weeks delivery time. If you need a table ACUTE, look at our other series or inquire which tables in this series we have in stock in our AKUT contingency.

Our steel products are food approved.

All our steel tables, steel table tops, etc. is produced to order, which allows for special solutions.

The material is the stainless steel type EN 1.4509.

The steel tables are solid, stable and are welded together.

The table tops have steel braces on the underside, but are hollow inside.

DRAWING:

Before a steel table with sink, a steel table top, a steel shelf, etc. is produced, the manufacturer prepares a 3D drawing, unless otherwise stated by the seller. It typically takes a week to draw, after which you will receive it by email. Before you approve the drawing, it is important that you check that the drawing is correct, as the item is produced after the drawing.

DELIVERY TIME:

It's about. 3-4 weeks delivery time, after the drawing is approved. If you have an urgent order, you can let us know. We will then hear about the possibility of faster delivery, but the delivery time is always up to the manufacturer.

SINCE THE TABLES ARE PRODUCED TO ORDER, WE MUST KNOW THE FOLLOWING:

The tables measure 900 mm in height (and have adjustable feet of 40 mm), if a different height is desired, this must be stated to the seller.

It is optional if a trailing edge (60 mm) is desired on the item. Whether there is a trailing edge or not does not affect the price.

The size of the sink (see section "washing").

Since the sink can be placed anywhere on the table top, we need to know where it is to be placed.

Whether to make a luminaire hole (Ø 35 mm) at no extra cost. The faucet hole can be placed behind the sink on the left, in the middle or on the right.

The sink drain is placed in one of the 4 corners.

There are several different options for acquisitions, which can be checked in the section "acquisitions".

We have the opportunity to produce a lot within steel products, so finally contact us if you have special wishes.

CAPABILITY:

Shelves generally take 60 kg. Table tops 80 kg. For machines that must be on the table where the weight is higher than above, this must be stated to the seller. In collaboration with the factory, it is assessed whether it is possible to meet.

WASH:

Small sink: Length x depth x height in mm: 300 x 240 x 150 mm. Waiting time may occur on this sink.

Standard wash: Length x depth in mm: 340 x 240 x 150/340 x 240 x 200/340 x 400 x 200/400 x 400 x 200/400 x 400 x 250/400 x 400 x 300/400 x 500 x 250 / 500 x 400 x 300/500 x 500 x 250/500 x 500 x 300

Large sink: A possible larger sink (min. 500 x 600 x 320 mm) costs DKK 995 excl. VAT in addition

Wash size: Since the wash needs to be able to wear, the wash must be min. 200 mm less in depth than the depth of the table top. Ie If you have chosen a table top of 600 mm in depth, the sink can measure a maximum of 400 mm in depth.